Once upon a time I was a newbie quilter who made her first ever set of pinwheels out of adorable black and red fabric. The pinwheels were adorable in theory, but the mismatched points were glaringly unsightly. Enter the humble button, which saved my first attempts from being seam ripped or ignored and gave them new life.

Oops!  Ugly offset points on your pinwheel quilt block?  Cover it with a button!  Fixed it! | Craftcore

 

There, that’s much better!

I made these pinwheels as a test, then set them aside.  I eventually came across them again and decided to repurpose them into a small tote bag to use while travelling on the train.  I wanted to be able to put my lunch at the base of the bag but still have plenty of room for a book and miscellaneous items.

Craftcore | learn how to make a pinwheel tote bag

This tutorial is a two-parter.  First, we’ll need to create the 7″ finished (7.5″ unfinished) double pinwheel.  Second, we’ll need to create the bag itself.

Part 1: How to Make a 7″ Double Pinwheel

Now, as I mentioned earlier, the two pinwheels featured on this bag were made long before this bag was made.  I didn’t take photos of those particular pinwheels, so I hope you don’t mind that the pinwheel section of this tutorial is using some pink fabrics I had on hand.

We are going to make the pinwheels using the quarter square triangle method outlined on the Craftcore HST and QST Guide.

By following the method in this tutorial, you will create two similar but not identical double pinwheels as illustrated below.

Craftcore | How  to Make a Double Pinwheel

  1. Cut out 4 squares, 4 3/8″ each.  Cut these in half diagonally, forming 8 triangles.  This fabric is represented by grey in the above diagram.
  2. Cut out 4 squares, 4 3/4″ each, from 2 different fabrics (8 squares total).
  3. For exact step-by-step instructions of how to create pairs of half square triangles, please refer to the How to Assemble a QST Unit section of the Craftcore HST and QST Guide.  Here is the basic flow: Pair one fabric square (represented by purple in the above diagram) with one fabric square (represented by white in the above diagram), and stack them right sides together.  Draw a line diagonally from corner to corner then sew an exact 1/4″ inch along both sides of the line.  Cut along the drawn line.  Then draw a line from the exact middle of the long end of this pieced triangle to the point exactly opposite and cut along that line.  This will create a two pairs of joined half square triangles.  Repeat x 4.
    How to Make 8 QST (Quarter Square Triangles)
  4. Using a 1/4″ seam, sew one QST pair to one half square triangle.  You can chain piece to make this process faster:
    Craftcore | How to Make a Double Pinwheel Tutorial
    You’ll now have 4 pairs of each design:
    Craftcore | How to Make a Double Pinwheel Tutorial
  5. Layout your design like below:
    Craftcore | How to Make a Double Pinwheel Tutorial
    Craftcore | How to Make a Double Pinwheel Tutorial
  6. Clip off the little dog ears sticking out from your blocks.  Sew one column/row at a time making two halves using a 1/4″ seam:
    Craftcore | How to Make a Double Pinwheel Tutorial
  7. To help make perfect points, press one seam to the left and one seam to the right.  You can nest them so they appear like they do below, then pin in place. Sew those two halves together.  If it’s not perfect, you can cover with a button for this project, so no pressure!Craftcore | How to Make a Double Pinwheel Tutorial

You’ll now have two 7.5″ unfinished double pinwheel blocks that you can use to create the Tall & Skinny Tote Bag.

Craftcore | How to Make a Double Pinwheel Tutorial
Craftcore | How to Make a Double Pinwheel Tutorial

Continue to the next phase of the tutorial on page 2!

1 thought on “How to Make a Tall & Skinny Pinwheel Tote Bag

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes:

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>